Reverb (1 Type); Gated Reverb; Delay (9 Types) - Roland MC-909 Owner's Manual

Multi-Effects List

38: GATED REVERB

This is a special type of reverb in which the reverb is cut off without
being allowed to decay naturally.
fig.MFX38
L in
Balance D
Gated Reverb
R in
Balance D
Parameter Value
Type NORMAL,
REVERSE
Pre Delay 0.0–100.0
ms
Time 5–500 ms
Pan #1 L64–63R
Low Gain -15– +15 dB
High Gain -15– +15 dB
Balance #2 D100:0W–
D0:100W
Level 0–127
104
2-Band
L out
EQ
Balance W
Balance W
2-Band
R out
EQ
Description
Type of reverb
NORMAL: conventional gated
reverb
REVERSE: backwards reverb
Adjusts the time until the reverb
sound is heard.
Adjusts the time from when the re-
verb is first heard until it disap-
pears.
Stereo location of Pitch Shift
Gain of the low frequency range
Gain of the high frequency range
Volume balance between the direct
sound (D) and the reverb sound (W)
Output level
39: STEREO DELAY
This is a stereo delay.
When Feedback Mode is NORMAL:
fig.MFX39a
Balance D
L in
Delay
Feedback
Feedback
Delay
R in
Balance D
When Feedback Mode is CROSS:
fig.MFX39b
Balance D
L in
Delay
Feedback
Feedback
Delay
R in
Balance D
Parameter Value
Feedback NORMAL,
Mode CROSS
Delay Left 0–2000 ms,
Delay Right note
Phase Left NORMAL,
Phase Right INVERT
Feedback -98– +98 %
#1
HF Damp 200–8000
Hz, BY-
PASS
Low Gain -15– +15 dB
High Gain -15– +15 dB
Balance #2 D100:0W–
D0:100W
Level 0–127
(MFX2 only)
2-Band
L out
EQ
Balance W
Balance W
2-Band
R out
EQ
2-Band
L out
EQ
Balance W
Balance W
2-Band
R out
EQ
Description
Selects the way in which delay
sound is fed back into the effect.
(See the figures above.)
Adjusts the time until the delay
sound is heard.
Phase of the delay sound
Adjusts the amount of the delay
sound that's fed back into the effect.
Negative (-) settings invert the
phase.
Adjusts the frequency above which
sound fed back to the effect is fil-
tered out. If you don't want to filter
out any high frequencies, set this
parameter to BYPASS.
Gain of the low frequency range
Gain of the high frequency range
Volume balance between the direct
sound (D) and the delay sound (W)
Output level