Edit Time Stretch; Normalize - Roland MC-909 Owner's Manual

Edit Time Stretch

This operation stretches or shrinks the sample to modify the length
or tempo.
You can stretch or shrink the sample by a factor of one half to double
the original length.
1. Press [TIME STRETCH].
Alternatively, hold down [SHIFT] and press [F4 (Time Stretch)].
2. Press [F1 (Sample List)] and select a sample.
3. Press [CURSOR (up/down)] to select how you want
to specify the tempo/length.
Edit BPM:
Time Change the BPM (p. 116) of the sample to the BPM
Stretch you specify.
Time:
Specify the length of the sample as a time value.
Rate:
Specify the length relative to the current length of
the sample.
Range: 50.0–200.0%
Type TYPE01– Lower settings of this value will make
TYPE10 the sound more suitable for faster phras-
es, and higher settings will make the
sound more suitable for slower phrases.
Quality 1–10 Make fine adjustments to the tonal qual-
Adjust ity of the Time Stretch.
4. Use [VALUE] or [INC/DEC] to specify the tempo/
length.
5. Press [F6 (Execute)].
The length of the sample will be changed as specified.
* To cancel, press [F5 (Close)].

Normalize

This operation raises the level of the entire sample as much as
possible without exceeding the maximum level.
1. Press [NORMALIZE/AMP].
2. Press [F1 (Sample List)] and select a sample.
3. If you want to replace the current sample with the
normalized sample, press [F4 (Over Write)] to display
the "✔" symbol.
4. Press [F6 (Execute)].
A message will ask you for confirmation.
5. To execute, press [F6 (Execute)].
* To cancel, press [F5 (Cancel)].
Sample Edit
121