Triple Tap Delay; Quadruple Tap Delay - Roland MC-909 Owner's Manual

40: MODULATION DELAY
Adds modulation to the delayed sound.
When Feedback Mode is NORMAL:
fig.MFX40a
Balance D
L in
Delay Modulation
Feedback
Feedback
Delay
Modulation
R in
Balance D
When Feedback Mode is CROSS:
fig.MFX40b
Balance D
L in
Delay Modulation
Feedback
Feedback
Delay Modulation
R in
Balance D
Parameter Value Description
Feedback NORMAL, Selects the way in which delay
Mode CROSS sound is fed back into the effect (See
the figures above.)
Delay Left 0–2000 ms, Adjusts the time until the delay
Delay Right note sound is heard.
Feedback -98– +98 % Adjusts the amount of the delay
sound that's fed back into the effect.
Negative (-) settings invert the
phase.
HF Damp 200–8000 Adjusts the frequency above which
Hz, BY- sound fed back to the effect is fil-
PASS tered out. If you don't want to filter
out any high frequencies, set this
parameter to BYPASS.
Rate 0.05–10.00 Frequency of modulation
Hz
Depth 0–127 Depth of modulation
Phase 0-180 deg Spatial spread of the sound
Low Gain -15– +15 dB Gain of the low frequency range
High Gain -15– +15 dB Gain of the high frequency range
Balance # D100:0W– Volume balance between the direct
D0:100W sound (D) and the delay sound (W)
Level 0–127 Output level
(MFX2 only)
2-Band
L out
EQ
Balance W
Balance W
2-Band
R out
EQ
2-Band
L out
EQ
Balance W
Balance W
2-Band
R out
EQ

41: TRIPLE TAP DELAY

Produces three delay sounds; center, left and right.
fig.MFX41
L in
Left Tap
Triple Tap Delay Center Tap
Feedback
Right Tap
R in
Parameter Value Description
Delay Left/ 0–4000 ms, Adjusts the time until the delay
Right/Center note sound is heard.
Feedback -98– +98 % Adjusts the amount of the delay
#1 sound that's fed back into the effect.
Negative (-) settings invert the phase.
HF Damp 200–8000 Adjusts the frequency above which
Hz, BY- sound fed back to the effect is fil-
PASS tered out. If you do not want to filter
out any high frequencies, set this
parameter to BYPASS.
Left/Right/ 0–127 Volume of each delay
Center Level
Low Gain -15– +15 dB Gain of the low frequency range
High Gain -15– +15 dB Gain of the high frequency range
Balance #2 D100:0W– Volume balance between the direct
D0:100W sound (D) and the delay sound (W)
Level 0–127 Output level

42: QUADRUPLE TAP DELAY

This effect has four delays.
fig.MFX42a
L in
Delay 1
Feedback
Delay 2
Quadruple Tap Delay
Delay 3
Delay 4
R in
fig.MFX42b
Stereo location of each delay
2 3
1 4
R
L
Parameter Value Description
Delay 1–4 0–4000 ms, Adjusts the time until the delay
note sound is heard.
Level 1–4 0–127 Volume of each delay
Feedback -98– +98 % Adjusts the amount of the delay
#1 sound that's fed back into the effect.
Negative (-) settings invert the phase.
HF Damp 200–8000 Adjusts the frequency above which
Hz, BY- sound fed back to the effect is fil-
PASS tered out. If you do not want to filter
out any high frequencies, set this
parameter to BYPASS.
Balance #2 D100:0W– Volume balance between the direct
D0:100W sound (D) and the delay sound (W)
Level 0–127 Output level
Multi-Effects List
(MFX2 only)
Balance D
2-Band
L out
EQ
Balance W
Balance W
2-Band
R out
EQ
Balance D
(MFX2 only)
Balance D
L out
Balance W
Balance W
R out
Balance D
105