Patch Mode (Editing a Patch)
Effects (Setting Effects for a Patch)
The V-Synth GT provides three high-quality effects: Tone-FX (tone effect), Chorus, and Reverb. The tone effect can be
applied to each tone individually, and the amount of signal sent to chorus and to reverb can be specified individually
for each tone.
You can also access the effects screen by touching <Effect> in the Patch Menu, as well as from the Patch Common
screen.
Routing
Each effect block is displayed as if it were a small rack-mounted unit. You can turn each effect on/off to freely specify
the connection path (signal routing).
fig.05-50-j.eps_50
76
Chorus On/Off Switch
Chorus Type
Chorus Master Level
Reverb Master Level
Reverb Type
Reverb On/Off Switch