Roland V-Synth GT Owner's Manual page 77

Parameter
TVA Tone-FX Send
(TVA Tone-FX Send Level)
TVA CHO Send
(TVA Chorus Send Level)
TVA REV Send
(TVA Reverb Send Level)
TVA Output Assign
AP Syn Tone-FX Send
(AP Syn Tone-FX Send Level)
AP Syn CHO Send
(AP Syn Chorus Send Level)
AP Syn REV Send
(AP Syn Reverb Send Level)
AP Syn Output Assign
Tone-FX
(Tone-FX On/Off Switch)
Tone-FX Type
Tone-FX Master Level
Tone-FX To CHO
(Tone-FX Chorus Send Level)
Tone FX-To REV
(Tone-FX Reverb Send Level)
CHO
(Chorus On/Off Switch)
CHO Type
(Chorus Type)
CHO Master Level
(Chorus Master Level)
CHO To REV
(Chorus Reverb Send Level)
REV
(Reverb On/Off Switch)
REV Type (Reverb Type)
REV Master Level
(Reverb Master Level)
Value Description
0–127 These parameters can be set for each tone.
For details, refer to "Tone-FX (Tone Effect)" (p. 139).
0–127
0–127
T-FX
MAIN
DIR
0–127
0–127
0–127
T-FX
MAIN
DIR
OFF, ON
00 (Thru)–41
0–127
0–127
0–127
OFF, ON Switches chorus on and off.
00 (Off)–08 Touching this will take you to the Chorus screen (p. 78), where you can
choose one of eight types of chorus. For details on each type of chorus, refer
to "COSM_EffectsList(E).pdf" in the "EFFECTS LIST" folder on the included
CD-ROM.
0–127 Adjusts the volume of the sound that has passed through chorus.
0–127 Adjusts the amount of reverb for the sound that passes through chorus. If you
don't want to add the Reverb effect, set it to "0."
OFF, ON Switches reverb on and off.
00 (Off)–13 Touching this will take you to the Reverb screen (p. 79), where you can
choose one of 13 types of reverb. For details on each type of reverb, refer
to "COSM_EffectsList(E).pdf" in the "EFFECTS LIST" folder on the included
CD-ROM.
0–127 Adjusts the volume of the sound that has passed through reverb.
Patch Mode (Editing a Patch)
77