Table of Contents
Advertisement
An Overview of FANTOM
About the Effects
The FANTOM is equipped with the following built-in effects, and settings can be made independently for each.
Effect type
Effect
Multi-effect (MFX)
Tone effects
DRUM KIT COMP
PARTIAL EQ
KIT PARTIAL EQ (KIT PTL EQ)
Zone EQ
Chorus
Reverb
Scene (Zone) effects
Insert effect1 (IFX1)
Insert effect2 (IFX2)
System Effects
Mastering Comp
MASTER FX
Mastering EQ
Total Effect (TFX)
Low Cut
Vocoder
Noise Suppressor
Effects applied to the
AUDIO INPUT jack
Input MFX (IN MFX)
Input EQ (EQ)
Input Reverb (REV)
20
20
Explanation
This is a general-purpose multi-effect that transforms the sound itself, giving it an
entirely different character. You can choose from 90 types as appropriate for your
needs.
These types include single effects such as distortion or flanger, as well as a variety of
other types.
Each tone has settings for one multi-effect.
A drum kit can use six compressor units. These can be assigned to individual drum
instruments.
A drum kit can be assigned to all zones, but the six compressor units for a drum kit
apply only to the specified one zone (the zone specified by Drum Kit Comp Zone).
This is an equalizer that can be applied to each partial of tone.
You can independently adjust the high, mid, and low-frequency ranges.
This is an equalizer that can be applied to each drum inst.
You can independently adjust the high, mid, and low-frequency ranges.
This is an equalizer that can be applied to each zone.
You can independently adjust the high, mid, and low-frequency ranges.
Chorus is an effect that adds depth and spaciousness to the sound.
This effect is common to all zones.
Reverb is an effect that produces the reverberation that is characteristic of sounds
heard in a hall.
This effect is common to all zones.
These are general-purpose insert effects that can transform the sound itself, giving
it a completely different character.
There are 90 types, and you can select and use the type that's appropriate for your
purpose. Use these when you want to apply a further effect in addition to the multi-
effect. The insert effects provide two independent effect units, IFX 1 and 2, and
you can make routing settings to connect IFX 1 and 2 in series or in parallel. These
effects are common to all zones.
The mastering compressor compresses sound that is louder than the specified
volume level, making the volume more consistent.
It can be adjusted independently for the high, mid, and low-frequency regions.
The mastering EQ is an equalizer that is applied to the entire sound engine of the
FANTOM.
You can independently adjust the high, mid, and low-frequency ranges.
This is located after the mastering compressor and mastering EQ in the effects
chain. You can apply this multi-effect to the overall sound of the unit.
This cuts the unwanted low-frequency portion from the input sound of the AUDIO
INPUT jacks.
An effect that applies a human vocal character to the synth sound to produce a
sound like someone singing.
Suppresses background noise during silence.
You can sample sounds inputted through the AUDIO INPUT jack with the MFX
applied, or apply the MFX to instrument tones you are playing that do not use
effects.
This equalizer is applied to the input sound from the AUDIO INPUT jacks.
This reverb is applied to the input sound from the AUDIO INPUT jacks.
Advertisement
Table of Contents
