Roland V-Synth GT Owner's Manual page 92

Editing a Tone (Pro Edit)
Com OSC1/2 MOD COSM1/2
Parameter
Source 1, 2
(Matrix Control Source 1, 2)
Sets the MIDI message used to
change the patch parameter with
the Matrix Control.
Sens 1, 2
(Matrix Control Sens 1, 2)
Destination 1, 2
(Matrix Control Destination 1, 2)
Specifies the parameters that will
be controlled by the matrix con-
trollers. When not controlling pa-
rameters with the Matrix Control,
set this to "OFF." Up to two pa-
rameters can be specified for
each Matrix Control, and con-
trolled simultaneously.
For details on each parameter, re-
fer to the corresponding reference
page.
92
TVA AP Syn Effects
Value
OFF
CC01–31, 33–95
BEND
AFT
+PAD-X
+PAD-Y
PAD-X
PAD-Y
TRIP-R
BEAM-L
BEAM-R
KNOB1
KNOB2
VELO
KEYF
-63– +63
OSC1/2-PITCH
OSC1/2-TIME/PW
OSC1/2-FORMA/FAT
OSC1/2-LVL
OSC1/2-PENV-ATK
OSC1/2-PENV-DCY
OSC1/2-PENV-REL
OSC1/2-TENV-ATK
OSC1/2-TENV-DCY
OSC1/2-TENV-REL
OSC1/2-FENV-ATK
OSC1/2-FENV-DCY
OSC1/2-FENV-REL
OSC1/2-AENV-ATK
OSC1/2-AENV-DCY
OSC1/2-AENV-REL
OSC1/2-LFO-RATE
OSC1/2-LFO-PCH
OSC1/2-LFO-TM/PW
OSC1/2-LFO-FR/FT
OSC1/2-LFO-LVL
CSM1/2-PRM1
CSM1/2-PRM2
CSM1/2-ENV1-ATK
CSM1/2-ENV1-DCY
CSM1/2-ENV1-REL
Description
Matrix control will not be used.
Controller numbers 1–31, 33–95
Pitch Bend
Aftertouch
Time Trip pad (horizontal direction from the center)
Time Trip pad (vertical direction from the center)
Time Trip pad (horizontal direction)
Time Trip pad (vertical direction)
Time Trip pad (center from the circumference)
D Beam controller (left)
D Beam controller (right)
Assignable Controller ([C1])
Assignable Controller ([C2])
Velocity (pressure you press a key with)
Note Number
Sets the amount of the Matrix Control's effect that is applied. If you
wish to modify the selected parameter in a positive (+) direction –
i.e., a higher value, toward the right, or faster etc. – from its current
setting, select a positive (+) value. If you wish to modify the selected
parameter in a negative (-) direction – i.e., a lower value, toward
the left, or slower etc. – from its current setting, select a negative (-
) value. When both positive and negative are selected, the changes
are greater as the value increases. Set it to "0" if you don't want
this effect.
Oscillator Pitch (p. 97, p. 99, p. 102)
Time/Pulse Width (p. 97, p. 103)
Formant/Fat (p. 97, p. 100, p. 104, p. 112)
Level (p. 113)
Pitch Envelope Attack Time (p. 121)
Pitch Envelope Decay Time (p. 121)
Pitch Envelope Release Time (p. 121)
Time Envelope Attack Time (p. 121)
Time Envelope Decay Time (p. 121)
Time Envelope Release Time (p. 121)
Formant Envelope Attack Time (p. 121)
Formant Envelope Decay Time (p. 121)
Formant Envelope Release Time (p. 121)
Oscillator TVA Envelope Attack Time (p. 121)
Oscillator TVA Envelope Decay Time (p. 121)
Oscillator TVA Envelope Release Time (p. 121)
Oscillator LFO Rate (p. 122)
Oscillator Pitch LFO Depth (p. 102)
Time/Pulse Width LFO Depth (p. 103)
Formant/Fat LFO Depth (p. 104, p. 112)
Oscillator Level LFO Depth (p. 113)
Refer to "COSM_EffectsList(E).pdf" in the "EFFECTS LIST" folder on
the included CD-ROM.
Refer to "COSM_EffectsList(E).pdf" in the "EFFECTS LIST" folder on
the included CD-ROM.
COSM Envelope Attack Time (p. 121)
COSM Envelope Decay Time (p. 121)
COSM Envelope Release Time (p. 121)