Using Steps To Vary The Sound (Multi Step Modulator) - Roland V-Synth GT Owner's Manual

Editing a Tone (Pro Edit)

Using Steps to Vary the Sound (Multi Step Modulator)

The Multi Step Modulator is a function that modulates the value of various parameters according to a sixteen-step
sequence. On the V-Synth GT, the patterns of this sequence are managed as "tracks." You can simultaneously use up
to four tracks, with each track containing a different sequence. You can use the panel knobs to freely modify the
sequence pattern.
1.
Press [PATCH] to access the Patch Play screen.
2.
Touch <Step Mod>.
fig.03-step04
The Multi Step Modulator screen will appear.
fig.03-step02
Multi Step Modulator Switch
3.
Turn <Multi Step Modulator Switch> ON.
The Multi Step Modulator will be applied to the currently selected patch.
4.
Touch < A >–< D > to turn tracks on/off as desired.
* If you turn all of the tracks off, there will be no effect even if <Multi Step Modulator Switch> is ON.
fig.StepModTrackSW
142
<Step Mod>