Common (Settings Common To The Entire System); Master - Roland V-Synth GT Owner's Manual

System Mode (Settings Common to All Modes)

Common (Settings Common to the Entire System)

Master

fig.08-02.eps_50
Parameter
Master Tune
Master Key Shift
Master Level
Patch Remain
(Patch Remain Switch)
Startup Patch
196
Value Description
415.3–466.2 Adjusts the overall tuning of the V-Synth GT. The display shows the frequency
Hz of the A4 note (center A).
-24– +24 Shifts the overall pitch of the V-Synth GT in semitone steps.
0–127 Adjusts the volume of the entire V-Synth GT.
OFF, ON Specifies whether currently sounding notes will continue sounding when an-
other patch is selected (ON), or not (OFF).
* This function is valid only when the effect is turned off.
Also, when this is "ON," changes produced by incoming MIDI messages
such as Volume (CC 7) or Pan (CC 10), as well as tonal quality and volume
changes produced by the various controllers will be inherited.
If you're using AP-Synthesis, the sound will be interrupted when you switch
patches, even if the Patch Remain Switch is ON.
Last Patch When the power is turned on, the V-Synth GT reinstates the patch selected at
the time the V-Synth GT was last turned off.
Patch 001 When the power is turned on, the V-Synth GT will be ready to play Patch
"001."