D Beam; S1/S2 Switch - Roland V-Synth GT Owner's Manual

D Beam

fig.05-22.eps_50
Parameter
D Beam (D Beam Mode)

S1/S2 Switch

fig.05-24.eps_50
Parameter
S1/S2 Switch Setting
Value Description
OFF The D Beam controller will not be used.
Time Trip The D Beam controller will control the Time Trip effect (p. 46).
Time The D Beam controller will control the Time Control effect.
Pitch The D Beam controller will control the Pitch Control effect.
Assignable The D Beam controller will control the effect specified for each tone.
For details on how to specify the effect that will be controlled when
"Assignable" is selected, refer to "Matrix Control" (p. 91).
Value Description
Latch The on/off status will alternate each time you press [S1] [S2].
Momentary The status will be on only while you hold down [S1] [S2].
Patch Mode (Editing a Patch)
67