Patch Name (Naming A Patch) - Roland V-Synth GT Owner's Manual

Patch Name (Naming a Patch)

Assign a new name to the patch before you save it. You can assign a name of up to twelve characters to the patch.
1.
Make sure that the patch that you want to name is selected.
2.
Touch <MENU> in the upper right of the screen.
A pulldown menu appears.
fig.05-03.eps_50
3.
In the pulldown menu, touch <Patch Name>.
The Patch Name window appears.
fig.05-06-ps.eps_50
4.
Touch the on-screen alphabetic or numeric keys to enter the new name in the text box.
The on-screen keys have the following functions.
< << >< >> >
<shift>
<clear all>
<back space>
<delete>
5.
When you have finished inputting, touch <OK> to finalize the patch name.
If you want to return to the original unedited name, touch <EXIT>.
* You will lose your edited patch settings if you switch to another patch or turn off the power. If you want to keep a patch whose
settings you have edited, then perform the Save operation (p. 58).
* You can also assign a category to each patch (p. 60).
Move the cursor in the text box to the desired input location.
Turn this on when you want to input uppercase letters or symbols.
Erases all characters in the text box.
Deletes the character that precedes the cursor location.
Deletes the character at the cursor location.
Patch Mode (Editing a Patch)
59