Mac Users - Roland V-Synth GT Owner's Manual

Mac Users

Connecting the V-Synth GT to Your Computer
1.
Make sure that the power of the V-Synth GT is turned off.
2.
Start up your computer.
3.
Connect the V-Synth GT and your computer using a USB cable.
fig.09-15_j.eps_50
Computer
4.
Turn on the power of V-Synth GT.
5.
Touch <USB Storage> in the Utility Menu screen.
The USB Storage screen appears.
fig.09-11-ps.eps_50
6.
Touch <Mount the Internal Memory> to establish the connection with your computer.
7.
When the USB connection is established, a new drive icon will appear on your desktop.
8.
Once the V-Synth GT is connected, you can transfer files by operating your computer.
USB
Connector
USB Cable
Utility Mode
V-Synth GT
223