Web Browser - WEG CFW-11 User Manual

Figure 2.7: IPconfig software information editing.

Web Browser

In case the IP address is known, it is possible to use a web browser to access the data configuration of the
Anybus-CC module. Typing the IP address in the address bar of the browser, you will see a webpage with links
for the configurations of the interface or for the data of the equipment.
In the interface configurations, you will find several fields to program IP address, subnet, DHCP, among others.
Figure 2.8: Webpage of interface configuration
The data mapped in the input/output (I/O) areas can also be accessed by means of the web browser through
the link "Parameter Data". Through this page, it is possible to read the monitoring data, as well as to modify the
equipment control data.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com