Check Valve Installation; Ducted Version Air Exhaust System - Midea MHS60S Instructions Manual

60cm slideout rangehood
Hide thumbs Also See for MHS60S:
Table of Contents

Advertisement

Congratulations on the purchase our cooker hood which is designed to include many superior
features that permit you the fullest expression of your living. Before installing and/or using the
cooker hood carefully read all the instruction.
● If the installation surface of the cabinet is not suitable for installing the cooker hood, then as per
figures, fix the cooker hood on the correct position of the wall.
● On the wall, install 2 screws (supplied) according to the relative position of 2 key holes at the back
of hood.
● Also install screws in the security holes to provide a safer use in case the hood moves back and
forth.
Information
Congratulations on your purchasing our cooker hood. Before installing and/or using the
cooker hood, carefully read all the instructions.
Right
Information
The cooker hood must not be installed and connected to flues where other appliances are
installed and which run off other energy supplied different to electricity(water heater boiled
cookers(range/agas)etc.).
CONNECTIONS
CONNECTIONS

DUCTED VERSION AIR EXHAUST SYSTEM

DUCTED VERSION AIR EXHAUST SYSTEM
When installing the ducted version, connect the hood to the chimney
When installing the ducted version, connect the hood to the chimney
using either a flexible or rigid pipe ɸ 150 or ɸ 120 mm, the choice of
using either a flexible or a rigid pipe of ɸ 150 or ɸ 120 mm, the choice
which is left to the installer.
of which is left to the installer.
 To install a ɸ 120 mm air exhaust connection, insert the reducer
● To install a ɸ 120 mm air exhaust connection, insert the reducer
flange 3 on the hood body outlet.
flange 3 on the hood body outlet.
 Fix the pipe 4 in position using sufficient pipe clamps (not
● Fix the pipe 4 in position using sufficient pipe clamps (not supplied).
supplied).
 Remove possible charcoal filters.
● Remove possible charcoal filters.

CHECK VALVE INSTALLATION

Hold check valve (black) in your hands and align with the cut out on the top of the Rangehood. Turn
slightly to position check valve in to cut .out.
METHOD 2
Wrong
6
6

Advertisement

Table of Contents
loading

Table of Contents