Table of Contents
Advertisement
USE
Operation
Check before using
Check the safe condition of the appliance:
● Check whether there are visible defects.
● Check that all parts of the appliance have been securely fitted.
Switching on/off
● Control on the right side of cooker hood are the control switches.
● There are 2 speed switches of the motor and on/off switch of the light.
● Locker switch for operation.
Motor Operation
● [
] = Off
● [
] = Low Power Setting
● [
] = High Power Setting
Motor Operation
● [
] = Off
● [
] = On
GREASE FILTER
METAL SELF-SUPPORTING GREASE FILTER CLEANING
● The filters must be cleaned every 2 months of operation or more
frequently for particularly heavy usage, and can be washed in a
dishwasher.
● Slide the panel clip to release the aluminum filter.
● Remove the filters one by one by pushing them towards the back
side of the hood unit and simultaneously pulling downwards.
● Any kind of bending of the filters has to be avoided when washing
them. Before fitting them again into the hood, make sure that they
are completely dry. (The color of the filter surface may change over
time, but this has no influence to the filter efficiency).
● When fitting the filters into the hood, pay attention that they should be mounted in correct
position with the handle facing outwards.
● Close the clip panel.
ACTIVATED CHARCOAL FILTER (RECIRCULATION VERSION)
ACTIVATED CHARCOAL FILTER REPLACEMENT
These filters are not washable and cannot be regenerated, and must be replaced approximately
every 4 months of operation or more frequently for heavy usage.
● Remove the metal grease filters
● Remove the saturated activated charcoal filter.
● Fit the new filters.
● Replace the metal grease filters.
7
Advertisement
Table of Contents
