Mains And Earth Wiring - Pyronix Enforcer 64 Installation Manual

Mains and Earth Wiring

Mains power must be applied to the panel before connecting the back up battery.
It is important that the electrical earth connection is connected when connecting the 230V mains
supply to the Enforcer.
Do not locate the mains cables next to internal cabling.
Ensure that the Enforcer is not mounted on any metal surfaces.
Mains cables should not be internally 'looped' or tightly bundled as this may interfere with the
wireless antennas. Where possible it is recommended that all mains cables should be
installed through the area nearest the mains terminals as shown above.
12 Enforcer Installation Guide 102017854 - V01