Using Iar Embedded Workbench® For Arm; Building An Existing Ewarm Project - ST STM32F4DISCOVERY Getting Started

Using IAR Embedded Workbench® for ARM
6 Using IAR Embedded Workbench® for ARM
6.1

Building an existing EWARM project

The following is the procedure for building an existing EWARM project.
1. Open the IAR Embedded Workbench® for ARM (EWARM).
Figure 3
Figure 3.
2. In the File menu, select Open and click Workspace to display the Open Workspace
dialog box. Browse to select the demonstration workspace file and click Open to launch
it in the Project window.
3. In the Project menu, select Rebuild All to compile your project.
11/46
shows the basic names of the windows referred to in this document.
IAR Embedded Workbench IDE (Integrated Design Environment)
Doc ID 022172 Rev 1
UM1467