Instrument's Unit Configuration Information (_Uns Or - YOKOGAWA GX10 User Manual

2.10 ASCII Output Format
2.10.46 Instrument's Unit Configuration Information (_UNS or _UNR)
2-174
The output in response to the command "_UNS" or "_UNR" is shown below.
Syntax
EA<crlf>
p1,p2,p3,p4,p5,p6,p7,p8,p9,p10<crlf>
p1,p2,p3,p4,p5,p6,p7,p8,p9,p10<crlf>
...
EN<crlf>
Output Example
EA<crlf>
Main,0,'GX20-1J',1234567,xx-xx-xx-xx-xx-xx,R1.01.01,/MT /C2,0,10,--
--------------<crlf>
Sub,1,'GX90EX-02-ET1',1234567,xx-xx-xx-xx-xx-xx,R1.01.01,,0,6,-----
-----------<crlf>
EN<crlf>
One line (p1 to p10) contains configuration information of a single unit.
p Value Description
n
p1 Main, Sub Unit dependency (main or sub) information.
Main: Main unit (Only a single one exists in a system. GX/GP or GM
main unit)
Sub: Sub unit (Units other than the main unit. GX/GP expandable I/O
or GM sub unit)
p2 0,1 Unit address number. The address number of the main unit is 0.
Unit name (model name). Enclosed in single quotation marks. The
p3 'GX20-1J',
'GX90EX-02- main unit model or expansion module model in the expandable I/O
unit or sub unit
ET1'
P4 1234567 Product serial number.
p5 xx-xx-xx- MAC address.
xx-xx-xx xx = hexadecimal
p6 R1.01.01 Firmware version. The output format is "R+version."
p7 /MT /C2 Options. Codes of installed options delimited by spaces.
Fixed at 0.
p8 0
p9 6, 10 Maximum number of installable modules. If there are not installable
modules, 0 is output.
p10 ----------- Unit status. The unit status is output in a character string. See the
Expansion module status
------
(FSysConf)."
The main unit and expansion module information is output (indicated in green below).
Without an expandable I/O or sub unit
Main unit
AI AI
EX: Expansion module
AI, DI, etc.: I/O module
in section 2.10.24, "System Configuration
With an expandable I/O or sub unit
Main unit
AI EX
EX AI AI
EX AI DI
IM 04L51B01-17EN