Program Pattern Information Output (Fprgptninfo) - YOKOGAWA GX10 User Manual

2.10.35 Program Pattern Information Output (FPrgPtnInfo)

IM 04L51B01-17EN
The output in response to the command "FPrgPtnInfo" is shown below.
Syntax
EA<crlf>
PTNNO,a<crlf>
SEGNO,b<crlf>
SEGUSE,c<crlf>
SEGTM,hh:mm:ss<crlf>
WAITTM,hh:mm:ss<crlf>
RPT-MODE,d<crlf>
RPT-CNT,e<crlf>
RPT-REM,f<crlf>
RPT-START,g<crlf>
RPT-END,h<crlf>
STARTTM,yy/mo/dd hh:mm:ss<crlf>
ENDTM,yy/mo/dd hh:mm:ss<crlf>
EN<crlf>
PTNNO Running pattern number a (1 to 99)
SEGNO Running segment number b (1 to 99)
SEGUSE Number of segments c of the currently selected pattern (1 to 99)
SEGTM Remaining segment time
Hours
hh
Minutes (00 to 59)
mm
ss Seconds (00 to 59)
WAITTM Elapsed time of waiting
hh Hours
mm Minutes (00 to 59)
ss Seconds (00 to 59)
RPT-MODE Repeat setting d of the running pattern
ON
0
1 OFF
2 Repeat indefinitely
RPT-CNT Repeat count e of the running pattern (0 to 999)
RPT-REM Remaining repeat count f of the running pattern (0 to 999)
RPT-START Start segment number g of repeat operation (1 to 99)
RPT-END End segment number h of repeat operation (1 to 99)
Program operation start time
STARTTM
yy Year
mo Month
dd Day
hh Hour
mm Minute
ss Second (00 to 59)
ENDTM Program operation stop time
Year
yy
Month
mo
dd Day
hh Hour
mm Minute
ss Second (00 to 59)
(00 to 99)
(00 to 99)
(00 to 99)
(01 to 12)
(01 to 31)
(00 to 99)
(00 to 59)
(00 to 99)
(01 to 12)
(01 to 31)
(00 to 99)
(00 to 59)
2.10 ASCII Output Format
2-167
1
2
App