Recorder Status (Fstat) - YOKOGAWA GX10 User Manual

2.10.8

Recorder status (FStat)

IM 04L51B01-17EN
The output in response to the command "FStat,0" is shown below.
Syntax
EA<crlf>
aaa.bbb.ccc.ddd<crlf>
EN<crlf>
The output in response to the command "FStat,1" is shown below.
Syntax
EA<crlf>
aaa.bbb.ccc.ddd.eee.fff.ggg.hhh<crlf>
EN<crlf>
Status information 1 (see table below)
aaa
bbb Status information 2 (see table below)
ccc Status information 3 (see table below)
ddd Status information 4 (see table below)
eee Status information 5 (see table below)
fff Status information 6 (see table below)
ggg Status information 7 (see table below)
Status information 8 (see table below)
hhh
Status Information 1
Bit Name
0 Under control
1 Memory sampling
2 Computing
3 Alarm activated
4 Accessing medium
5 E-mail started
6 Buzzer activated
7 Re-transmitting
Status Information 2
Bit Name
0 -
1 -
2 Memory end
3 Touch operation
login
4 User lock out
present
5 -
6 Measurement
error
7 Communication
error
Status 3 and 4 are edge operations. They are cleared when read.
Description
Set to 1 while the recorder is under control.
Set to 1 during recording
Set to 1 while computation is in progress.
Set to 1 when an alarm is activated.
Set to 1 while the SD medium is being accessed.
Set to 1 while the e-mail transmission has been started.
Set to 1 when the buzzer is activated.
Set to 1 while re-transmitting.
Description
-
-
Set to 1 when the free space in the external memory is low.
Set to 1 when a user is logged in through touch operation.
Set to 1 when a user lock out occurs, and remains at 1 until
user locked ACK is issued (only when the advanced security
function (/AS) enabled).
-
Set to 1 while measurement errors are detected on an AI
module or when a burnout has occurred.
Set to 1 when a Modbus master, Modbus client, WT
communication, or SLMP communication error has occurred.
2.10 ASCII Output Format
2-131
1
2
App