Ftp Client Log (Flog) - YOKOGAWA GX10 User Manual

2.10 ASCII Output Format

2.10.16 FTP Client Log (FLog)

2-140
*
Detail
BAD_ADDR
BAD_NUM
BAD_CNT
NO_DATA
BAD_DATA
VALID
DROP_OUT
STALE
START
STOP
* "_" expresses an underscore.
The output in response to the command "FLog,FTP" is shown below.
Syntax
EA<crlf>
yyyy/mo/dd_hh:mm:ss_xxxxxxxxx_k_fff...f<crlf>
...
EN<crlf>
yyyy/mo/dd_hh:mm:ss Time of error occurrence
xxxxxxxxx
k
fff...f
Meaning
The address of the response message is invalid (does not match
the command).
The register of the response message is invalid (does not match
the command).
The number of registers in the response message is invalid (does
not match the command).
Data has not yet been received once.
Data conversion of the response message failed.
Data is being acquired normally.
Communication dropout occurred due to the inability to keep up.
The response from the connected device is slow relative to the read
cycle.
Modbus or communication settings were changed.
Modbus or communication settings were changed.
Year (1900 to 2099)
yyyy
Month (01 to 12)
mo
Day (01 to 31)
dd
hh Hour (00 to 23)
mm Minute (00 to 59)
ss Second (00 to 59)
Detailed code (fixed to 9 characters)
TCPIP_¯_¯ Internal processing error
HOSTADDR_ IP address not set
HOSTNAME_ Unable to resolve server host name
UNREACH_¯ Unable to connect to server
CONNECT_¯ Unable to connect to data port
SEND_¯_¯_ Transmission to data port failed
RECV_¯_¯_ Reception from data port failed
REPLY_¯_¯ Received reject response from server
SERVER_¯_ Invalid server response
CMDSEND_¯ Error in sending command to control port
CMDRECV_¯ Error in receiving command from control port
USER_¯_¯_ Invalid user name
PASS_¯_¯_ Invalid password
ACCT_¯_¯_ Internal processing error
TIMEOUT_¯ Response timeout
LINK_¯_¯_ Ethernet cable not connected
FILE_¯_¯_ File access failed
NOFD_¯_¯_ Internal processing error
NOID_¯_¯_ Internal processing error
PARAM_¯_¯ Internal processing error
CERT_¯_¯_ Certificate verification error
SSL_¯_¯_¯ Encryption communication error
Server type (P, S)
File name (fixed to 51 characters including extension. Unused
character positions are filled with spaces.)
IM 04L51B01-17EN