Control Summary (Flog) - YOKOGAWA GX10 User Manual

2.10 ASCII Output Format

2.10.22 Control Summary (FLog)

2-146
The output in response to the command "FLog,CTRL" is shown below.
Syntax
EA<crlf>
yyyy/mo/dd_hh:mm:ss_aaa...a_sss...s<crlf>
...
EN<crlf>
yyyy/mo/dd_hh:mm:ss
aaa...a
sss...s
Name
Loop number
Pattern number
Pattern number_loop number_type
Pattern number
Time of control occurrence
Year (1900 to 2099)
yyyy
Month (01 to 12)
mo
Day (01 to 31)
dd
hh Hour (00 to 23)
mm Minute (00 to 59)
ss Second (00 to 59)
Name (up to 13 characters)
Pattern number_loop number_type
Pattern number Up to 2 characters
Loop number Up to 4 characters
Type Up to 5 characters
If the maximum number of characters is not used,
unused characters become spaces.
Status (up to 12 characters)
State Description
LOCAL Control operation changed to local.
REMOTE Control operation changed to remote.
Control operation changed to
PROGRAM
program.
AUTO Control operation changed to auto.
MANUAL Control operation changed to manual.
CASCADE Control operation changed to
cascade.
RUN Run control operation
STOP Stop control operation
AT**_ON Auto-tuning start
**: PID number (value) or "R"
AT OFF Auto-tuning stop
PROG RUN Program operation run
PROG RESET Program operation stop
HOLD ON Program operation hold start
HOLD OFF Program operation hold release
WAIT ON Program operation wait start
WAIT OFF Program operation wait release
Program operation advance execution
ADVANCE
PVE**_ON PV event occurrence in program
operation
**: Event number (value)
PV event release in program
PVE**_OFF
operation
**: Event number (value)
Time event occurrence in program
TME**_ON
operation
**: Event number (value)
TME**_OFF Time event release in program
operation
**: Event number (value)
IM 04L51B01-17EN