Controller Cables And Connectors; User Interface (Ui) - Xerox 6279 Printer User Manual

Product Overview
Table 4: Back Panel Connectors
No. Description
1 Parallel Connector (not used)
2 Serial Connector
3 Link Integrity Light
4 Network Adapter Connector
5 Network Activity Light
6 Line-out Connector
(Audio)
7 Line-in/Microphone Connector (not used)
8 USB 2.0 Connectors (6)
9 VGA Video Connector
10 eSATA Connector (not used)
11 DisplayPort Connector (not used)
NOTE
On a system that is working normally and has a good network connection, the Link
Integrity Light illuminates continuously; the Network Activity Light blinks in response
to network activity.

Controller Cables and Connectors

The six communication pathway cables (called out as item 8 on the Back Panel Connector)
are described below.
• USB - Scanner to Controller - provides status and image information.
• USB - Printer to Controller - provides status and image information.
• USB - Power Module to Controller - provides status of the front Power Switch and
enables power to the Printer.
• USB - User Interface to the Controller.
• Audio Cable - UI to Controller for speaker tones, such as key beeps and alert tones.
• Video Cable - UI to Controller for displaying monitor screen contents.
Both Video Data and Command Status information is transmitted via the same USB
Interface. The Accxes Controller downloads Printer software/firmware through the
command status interface on the USB Port.

User Interface (UI)

The Printer User Interface and Web Printer Management Tool, accessed with a Web
Browser, are the two sources that enable users to set up and perform print service
operations.
1-6 ® ®
Xerox 6279 Wide Format Solution
Printer User Guide