Xerox 6279 Printer User Manual page 30

Product Overview
5. Pinch the Green Lever again to insert the new Media Shaft into a new media roll. Be
sure the roll ends are aligned according to the Media Size Label.
6. Remove the manufacturer's piece of tape holding the edge of the roll from unraveling.
NOTE
If you see any remaining glue when removing the tape from a new roll, wipe it
clean. This can cause misfeeds.
If the Media Roll is damaged, trim the damaged edge with scissors before proceeding
to the next step.
WARNING
Be careful not to pinch your fingers when you set the roll media in the Media
Drawer.
7. Return the Media Roll into the Shaft Guide with the paper's lead edge feeding under
the roll and towards you.
1-24 ® ®
Xerox 6279 Wide Format Solution
Printer User Guide