Xerox 6279 Printer User Manual page 95

Symptoms Remedy
Toner smudges when
• Make sure media is not damp. If the media is damp, replace with
rubbed with your
finger.
Toner is not fused to
• Switch on the paper heater switch, if it is off. This switch is located
the paper.
The paper is dirtied
• Load the correct type of media.
with toner.
• Make sure the correct media settings are selected.
• Change the Sharpness setting.
• Set the Media Thickness and adjust the Media Thickness Lever on
The entire paper area Contact your Xerox Customer Support Center. There may be an internal
is printed black. machine error.
Nothing is printed. Contact your Xerox Customer Support Center. There may be an internal
machine error.
Part of the image is
• Make sure the correct media series is used.
lost on the edge of
paper.
• If the image exceeds the machine's printable area, decrease the
The print displays
• Verify that the image density setting is correct.
excessive background.
• Check the quality of the original.
• Reduce the Density setting.
• Increase the Background Suppression setting.
® ®
Xerox 6279 Wide Format Solution
Printer User Guide
new media.
next to the Waste Toner Bottle.
the Scanner, if necessary.
original print area.
Problem Solving
6-5