Xerox 6279 Printer User Manual page 43

The second choice, shown below, is done by browsing to and uploading a file. This may
be easier than installing a driver. However, you have to manually adjust the printer
settings (e.g., 5 copies vs. 1) prior to submission and then change them back. You are
also limited to file formats that FreeFlow Accxes can directly support.
To Enable Job Reprint:
1. Launch an internet browser and enter in the IP address of the access controller or
your printer. (http://xx.xxx.xx.xx)
2. Select the Configuration > Miscellaneous tabs.
3. Ensure the Thumbnail Creation and Job Reprint Enable boxes are check marked.
4. Notice the Job Reprint Policy pull-down options and choose the desired outcome.
5. Select Update Printer to engage the above changes.
To Reprint a Job:
6. In Web Printer Management Tool, select the Utilities tab.
The Upload tab is the default shown.
7. Select the Browse button and navigate to the file you would like to print.
8. Select the Upload button.
9. Select Printer Queue.
10. Select Reprint Queue, the Status pull-down, and Print.
11. Select the Update Printer button.
® ®
Xerox 6279 Wide Format Solution
Printer User Guide
Job Information
2-7