Power Outage Job Status; If Job Reprint Is Enabled; Shutdown From Web Printer Management Tool - Xerox 6279 Printer User Manual

Power Outage Job Status

Should the system loose power unexpectedly and reboot, jobs are restored to their
previous state. This is similar to using the Shutdown and Restart button.
• All Copy/Scan jobs in progress will restart from the beginning automatically, when
power is resumed unless job reprint was disabled.
• Completed, cancelled, checkplot and sample copy jobs are discarded since they are
not considered reprintable.
• Jobs that were processing during the power outage are placed in the Job Information
> Hold queue.
• Jobs finished processing and ready to start printing during the power outage are
placed in the Job Information > Active queue.

If Job Reprint is enabled:

Copy/Scan jobs that finished processing are automatically resubmitted for printing.
Copy jobs run before print jobs.
Copy/Scan jobs finished processing are displayed in the Job Information > Reprint
queue.
Copy/Scan jobs that did not finish processing are cancelled.

Shutdown from Web Printer Management Tool

You can also shut down the system from the Web Printer Management Tool.
1. Open the Web Printer Management Tool at your workstation by entering the IP
Address of the machine in the web browser.
2. Select Utilities > Shutdown > Shutdown.
® ®
Xerox 6279 Wide Format Solution
Printer User Guide
System Administration
3-9