Disassemble The Front Chassis Assembly - Welch Allyn 53000 Service Manual
Vital signs monitor 300 series
Hide thumbs
Also See for 53000:
- Service manual (78 pages) ,
- Directions for use manual (94 pages) ,
- Directions for use manual (86 pages)
Table of Contents
Advertisement
60
Disassembly procedure
5. Disconnect the display-board flex cable (J5) from the main board.
Disassemble the front chassis assembly
The front chassis assembly contains the display board, keypad, and NIBP air fitting.
1. Remove the five screws securing the display board.
Disconnect the display-board flex cable from the main board (J5).
Slide the outer piece of the connector toward the cable to release
the cable; then slide the cable out of the connector.
Welch Allyn VSM 300 Series
Hide quick links:
Advertisement
Table of Contents
