Before You Begin; Tools Required For Installation; Personnel Needed For Installation - Agilent Technologies 7697A Installation And Startup Manual

1
Installation

Before You Begin

Tools required for installation

Table 1 Tools and parts for installation
Tool
Required
Torx T-20 driver
Open-end wrenches:
•
7/16-inch (2)
•
5/16-inch
Tubing cutter
Precision tubing cutter
Included
1/4-in. x 3/16-in. wrench
Column cutting wafer

Personnel needed for installation

6
Before installing the headspace sampler (HS), review the
information below.
The following tools and parts are needed for installation.
Agilent part number
5182-3465
8710-0972
8710-0510
8710-1709
5190-1442
8710-2618
5181-7487
The other necessary parts and tools are supplied with the
new instrument.
The instrument is heavy. When lifting or moving the
instrument, two persons are required.
Use
Transfer line installation
Swagelok fittings for gas connections, sample loop,
and transfer line
Cut 1/8-inch gas supply plumbing
Cut 1/16-inch stainless steel tubing
Transfer line installation
Transfer line installation
Installation and First Startup