Connect The Transfer Line To The Gc - Agilent Technologies 7697A Installation And Startup Manual

Connect the Transfer Line to the GC

Installation and First Startup
This procedure describes installation of the fused silica
transfer line provided with the instrument. If you have
purchased a different transfer line, you can install it instead
of the 530 µm line listed below. Refer to the
manual for part numbers and procedures.
Materials needed:
• 1/16- inch internal reducer union
• 530- µm fused silica column
• 11- mm septum
• Septum nut adapter (G3452- 60835)
Tools needed:
• 3/16- inch open end wrench
• 1/4- inch open end wrench
• Column cutting wafer
1
Installation
Maintenance
35