Before You Begin; Prepare Your System - Agilent Technologies 6460 Manual

Before you begin

Before you begin, you need to check that your system is ready. If you plan to
acquire data, you also need to set up the instrument.

Prepare your system

1 Check that:
2 Copy the data files to your PC.
Do not re-use the sulfa drug data files already on your system unless you know that you
NO T E
copied them from the originals on the disk and you are the only one using them. Data files
that are already on the system may contain processed results, leading to different behavior
during the exercises in this guide.
Agilent 6400 Series Triple Quad LC/MS Familiarization Guide
• The Data Acquisition program has been installed.
• The LC modules and the K6460 Mass Spectrometer have been configured.
• The performance has been verified.
• The system has been turned on.
If these actions have not yet been done, see the Installation Guide for your
instrument.
Copy the folder named SulfaDrugs in the Data folder on your Qualitative
Analysis installation disk to any location on your hard disk. This folder
contains all the data files needed for this exercise.
Before you begin
Prepare your system
3