Make the First Connection
Installation and First Startup
If using an Agilent data system, perform this step. If
operating the HS in standalone mode, skip this section.
Open the online session for the GC.
1
As the GC session opens, you will be prompted to
2
configure the instrument. Select Yes. The instrument
configuration utility opens.
If not prompted, open the utility from the Instrument
menu.
3
In the left pane, double- click on the 7697A instrument.
The instrument icon moves to the right hand list.
Click Configure. In the dialog that opens, enter the
4
following:
In the Connect Info group, enter the Instrument Name,
•
then enter the instrument IP address or host name.
Enter your license key in the Instrument License field.
•
You will see the Version Information for the instrument
appear (instrument serial number, firmware version,
software version, and so forth).
•
Enter any Notes as desired.
2
First Startup
57