The Software Keypad; To Connect To A Gc - Agilent Technologies 7820A Operating Manual

The Software Keypad

C A U T I O N

To connect to a GC

Operating Guide
Use the software keypad to:
• Operate the GC without an Agilent data system
• View instrument error conditions
• Prepare the GC for maintenance
• Clear fault conditions
The software keypad can control only one 7820A Series GC
at a time. It can connect to any 7820A GC on the PC's
network.
Use only one software keypad at a time to connect to a given GC.
Go to Connection > Connect.
1
Select IP to enter/select an IP address, or Name to select a
2
GC using a previously assigned name.
From the Target list, either enter or select the GC IP
3
address or name.
Software Keypad Operation
3
31