Leica GS18 User Manual page 36

Establishing a Bluetooth connection between PC and GS instrument
Action
1.
2.
3.
4.
5.
6.
7.
8.
☞
Accessing the Web server
Action
1.
2.
36
Start the PC and turn on the GS instrument.
☞
Instead of connecting to your PC, you can connect your GS
instrument to the field controller. In this case, turn on the
field controller, start Captivate and establish a Bluetooth
connection to the GS instrument.
Run the Bluetooth software and start the Bluetooth Setup Wizard.
Click Next. The Bluetooth Device Selection will be started and an
automatic search will be done.
Select the shown GS instrument and click Next. The Bluetooth Secur-
ity Setup is started.
Type in 0000 as Bluetooth security code and click Pair Now. The
pairing procedure will be done and the Bluetooth Service Selection is
started.
Highlight Personal Ad-hoc Network and check the checkbox for
Personal Ad-hoc Network.
☞
Do not select Serial Port as service.
Click Next. The Bluetooth Setup Wizard Completion Page is star-
ted.
Type in a name for your GS instrument and click Finish to complete
the Bluetooth Setup Wizard.
This procedure has to be repeated for every GS instrument you want
to connect to.
Start the web browser on your PC/field controller.
☞
Ensure that your GS instrument is still running and the
Bluetooth connection between PC/field controller and GS is
established.
Type in 192.168.253.2. The Web server is started. You will see the
home functions following:
Go to Work!
•
• To select and start the Wake-up application.
Current Status
•
To access GNSS information of the GS as well as the instru-
•
ment firmware.
Instrument
•
To access configuration settings for the GS.
•
• User
To upload and activate firmware, licence keys and lan-
•
guages.
Operation