Install Leica USB driv-
ers
Operation
Action
Action
1.
Start the PC.
2.
Run the Setup_Leica_USB_XXbit.exe to install the drivers necessary
for Leica devices. Depending on the version (32bit or 64bit) of the
operating system on your PC, you have to select between the three
setup files following:
Setup_Leica_USB_32bit.exe
•
Setup_Leica_USB_64bit.exe
•
Setup_Leica_USB_64bit_itanium.exe
•
☞
To check the version of your operating system, go to Con-
trol Panel > System > System type.
☞
The setup requires administrative privileges.
☞
The setup has to be run only once for all Leicadevices.
☞
For PCs with Windows Vista/Windows 7/Windows 8/
Windows 10 operating system: If not already installed,
WMDC will be installed additionally otherwise this panel
would not appear. Click Install to continue or Cancel to
exit installation.
3.
The Welcome to InstallShield Wizard for Leica GS, TS/TM/MS,
CS and GR USB drivers window appears.
☞
Ensure that all Leica devices are disconnected from your PC
before you continue!
33