Leica GS18 User Manual page 31

Operation
3. Adjust the angle and the height
of the holder on the pole to a
comfortable position.
4. Tighten the clamp with the clamp
bolt.
5. Before placing the CS field con-
troller onto the mounting plate,
ensure that the locking pin is put
into the unlocked position. To
unlock the locking pin, push the
locking pin to the left.
6. Hold the CS field controller above
the holder and lower the end of
the CS field controller into the
mounting plate.
7. Apply slight pressure in a down-
ward direction and then lower
the top part of the CS field con-
troller until the unit is clicked into
the holder. The guides of the
mounting plate aid in this action.
8. After the CS field controller is
placed onto the mounting plate,
ensure that the locking pin is put
into the locked position. To lock
the locking pin, push the locking
pin to the right.
008546_001
7b
0014290_001
008549_001
31
7c
7a