Fitting The Fan - Fronius TransPocket 1500 Service Manual

Removing the fan
(continued)
Fig.7

Fitting the fan

Fig.8
Fig.9
Fig.10
(10)
(83)
(16)
(82)
- Lift the fan (10) slightly and carefully
pull it out to the side
- TP 1500 TIG: Pivot the gas solenoid
(33)
valve (16) back into its original position
- Fix the cables with cable binders (33)
- TP 1500 TIG: Screw the hexagon nut
(82) - width-across 17 - tightly to the
gas connector
90
Note! When inserting the fan,
make sure that it snaps into the
catches (83).