Installation Instructions: Front Of Housing, With Adhesive Label And Welding Sockets; Safety; General Remarks; Scope Of Supply - Fronius TransPocket 1500 Service Manual

Installation instructions: Front of housing, with
adhesive label and welding sockets

Safety

General remarks

These installation instructions describe the entire procedure for removing and fitting the
front of the housing, complete with welding sockets and adhesive label. If you only
intend to exchange the welding sockets, then it is only necessary to read and observe
the sections headed "Removing the welding sockets" and "Fitting the welding sockets".
As the front of the housing is supplied without welding sockets, the existing welding
sockets must be re-used with the new front of the housing.

Scope of supply

The assembly "Front of housing" (12,0405,0297)" comprises the following component:
Item
(23)
The assembly "Adhesive label" comprises the following components:
Item
(26)
(27)
(28)
The assembly "Welding socket" comprises the following components:
Item
(13)
(14)
The assembly "Hose clamp" (43,0407,0273) comprises the following component:
Item
(18)
Designation

Tools needed

- Manual torque screwdriver (1 to 6 Nm, 42,0411,0013)
- Bit insert TX 20, for torque screwdriver
Warning! Work performed incorrectly can cause serious injury and damage.
This modification may only be performed by suitably trained and skilled
electricians! Before opening up the machine, shift the mains switch to the "0"
position and unplug the machine from the mains!
Note! Follow the safety rules given in the Operating Instructions, especially the
section headed "Safety inspection".
Designation
Front of housing ................................................................................................. 1
Designation
Adhesive label TP 1500 (42,0409,2839) ............................................................ 1
Adhesive label TP 1500 RC (42,0409,2840) ..................................................... 1
Adhesive label TP 1500 TIG (42,0409,2841) ..................................................... 1
Designation
Minus welding socket TP 1500 TIG (42,0001,5346) .......................................... 1
Welding socket (general) (42,0001,3070) .......................................................... 1
Designation
Hose clamp ........................................................................................................ 1
106
N° of items
N° of items
N° of items
N° of items