Using Remote Hp Pc Hardware Diagnostics Uefi Settings (Select Products Only); Downloading Remote Hp Pc Hardware Diagnostics Uefi; Downloading The Latest Remote Hp Pc Hardware Diagnostics Uefi Version; Downloading Remote Hp Pc Hardware Diagnostics Uefi By Product Name Or Number - HP Z4 G4 Maintenance And Service Manual

Table of Contents

Using Remote HP PC Hardware Diagnostics UEFI settings (select

products only)

Remote HP PC Hardware Diagnostics UEFI is a firmware (BIOS) feature that downloads HP PC Hardware

Diagnostics UEFI to your computer. It can then execute the diagnostics on your computer, and it may upload

results to a preconfigured server. For more information on Remote HP PC Hardware Diagnostics UEFI, go to

http://www.hp.com/go/techcenter/pcdiags, and then select Find out more.

Downloading Remote HP PC Hardware Diagnostics UEFI

NOTE:

HP Remote PC Hardware Diagnostics UEFI is also available as a Softpaq that can be downloaded to a

server.

Downloading the latest Remote HP PC Hardware Diagnostics UEFI version

To download the latest Remote HP PC Hardware Diagnostics UEFI version, follow these steps:

Go to http://www.hp.com/go/techcenter/pcdiags. The HP PC Diagnostics home page is displayed.

In the HP PC Hardware Diagnostics UEFI section, select Download Remote Diagnostics, and then select

Run.

Downloading Remote HP PC Hardware Diagnostics UEFI by product name or number

NOTE:

For some products, it may be necessary to download the software by using the product name or

number.

To download HP Remote PC Hardware Diagnostics UEFI by product name or number, follow these steps:

Go to http://www.hp.com/support.

Select Get software and drivers, enter the product name or number, select your computer, and then

select your operating system.

In the Diagnostics section, follow the on-screen instructions to select and download the Remote UEFI

version for the product.

Customizing Remote HP PC Hardware Diagnostics UEFI settings

Using the Remote HP PC Hardware Diagnostics setting in Computer Setup (BIOS), you can perform the

following customizations:

●

Set a schedule for running diagnostics unattended. You can also start diagnostics immediately in

interactive mode by selecting Execute Remote HP PC Hardware Diagnostics.

●

Set the location for downloading the diagnostic tools. This feature provides access to the tools from the

HP website or from a server that has been preconfigured for use. Your computer does not require the

traditional local storage (such as a disk drive or USB flash drive) to run remote diagnostics.

●

Set a location for storing the test results. You can also set the user name and password settings used for

uploads.

●

Display status information about the diagnostics run previously.

To customize Remote HP PC Hardware Diagnostics UEFI settings, follow these steps:

Turn on or restart the computer, and when the HP logo appears, press

Select Advanced, and then select Settings.