"Out of Range" displays on screen.
Video resolution and refresh rate are set higher than what
the monitor supports.
High pitched noise coming from inside a flat panel monitor.
Brightness and/or contrast settings are too high.
Fuzzy focus; streaking, ghosting, or shadowing effects; horizontal scrolling lines; faint vertical bars; or unable to center
the picture on the screen (flat panel monitors using an analog VGA input connection only).
Flat panel monitor's internal digital conversion circuits may be
unable to correctly interpret the output synchronization of
the graphics card.
Graphics cable is not seated properly or has gone bad.
Graphics card is not seated properly or is bad.
Certain typed symbols do not appear correct.
The font you are using does not support that particular symbol.
Restart the computer and enter Safe Mode. Change the settings to
a supported setting then restart the computer so that the new
settings take effect.
To enter Safe Mode:
Log into the computer using an Administrator account.
Type msconfig in the taskbar search box, and then select
msconfig from the list of applications.
Click the Boot tab, select Safe boot and then click OK.
Lower brightness and/or contrast settings.
Select the monitor's Auto-Adjustment option in
the monitor's on-screen display menu.
Manually synchronize the Clock and Clock Phase on-screen
display functions. To download a SoftPaq that will assist you
with the synchronization, go to the following Web site,
select the appropriate monitor, and download either
SP32347 or SP32202:
Check the graphics cable connections to the monitor and the
Replace the graphics cable.
Reseat the graphics card.
Replace the graphics card.
Use the Character Map to locate and select the appropriate
symbol. You can copy the symbol from the Character Map into a
Type ch in the taskbar search box, and then select Character Map
from the list of applications.
Solving display problems