Storage Device - HP Z4 G4 Maintenance And Service Manual

Storage device

1. Prepare the computer for disassembly (see
2. Remove the access panel (see
3. Disconnect the storage device power cable (1) and SATA cable (2) from the storage device.
4. Squeeze and hold the drive cage release tabs (3).
5. Remove the drive cage (4) from the computer.
6. Separate the drive cage retention arms (1) from the storage device, making sure the retention pins (2)
fully release from the device.
7. Remove the storage device (3) from the drive cage.
Reverse this procedure to install the storage device.
Preparation for disassembly on page
Access panel on page 17).
15).
Storage device 19