Computer Setup (F10) Utility; Computer Setup (F10) Utilities - HP Z4 G4 Maintenance And Service Manual

5

Computer Setup (F10) Utility

Computer Setup (F10) Utilities

Use Computer Setup (F10) Utility to do the following:
● Change settings from the defaults or restore the settings to default values.
View the system configuration, including settings for processor, graphics, memory, audio, storage,
●
communications, and input devices.
● Modify the boot order of bootable devices such as hard drives, optical drives, or USB flash media devices.
● Establish an Ownership Tag, the text of which is displayed each time the system is turned on or
restarted.
Enter the Asset Tag or property identification number assigned by the company to this computer.
●
● Enable the power-on password prompt during system restarts (warm boots) as well as during power-on.
Establish an administrator password that controls access to the Computer Setup (F10) Utility and
●
the settings described in this section.
● Establish minimum requirements for valid passwords, including length and required types of characters.
● Secure integrated I/O functionality, including the serial, USB, or audio, or embedded NIC, so that they
cannot be used until they are unsecured.
Enable or disable different types of boot sources.
●
● Configure features such as Secure Boot, power management, virtualization support, and language and
keyboard type used in Setup and POST.
● Replicate the system setup by saving system configuration information on a USB device and restoring it
on one or more computers.
Enable or disable DriveLock security or securely erase a hard drive (when supported by drive).
●
Computer Setup (F10) Utilities 27