Pulse Input Value; Conversion Value For Integral Active Power - Panasonic KW9M User Manual

6.2.21 Pulse Input Value

・The present pulse input value is displayed.
・Press <SHIFT/▽> to change CNT1, CNT2.
CNT1 is not displayed when CNT1 is set to [Clock] (clock correction).
・Pulse input status (ON or OFF) is confirmed via communication. (MEWTOCOL and MODBUS)
Pulse input 1
*Turn on the unit during IN1 or IN2 is shorted, first 1-pulse is not counted and it doesn't light on [IN1]
[IN2]. After that, when pulse is input pulse it count the pulse.

6.2.22 Conversion value for integral active power

・The conversion value for the present integral active power (P) is displayed.
(Only total conversion value is displayed for 3P3W system.)
・Press <SHIFT/▽> to change total, phase 1 (1
・Press <SET> to change the display with each time-zone.
After changing, press <SET> to change displayed time-zone.
time-zone1(T1) →time-zone2(T2) →time-zone3(T3) →time-zone4(T4) →All time-zone
*Time-zone without setting for any time program is not displayed.
<1P2W/1P3W/3P4W>
All time-zone
Total
time-zone1
time-zone2, time-zone3, time-zone4 and all time-zone are changed in turn.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Pulse input 2
st
circuit), phase 2 (2
st
Phase 1 (1 circuit)
nd
circuit) and phase 3 (3
nd
Phase 2 (2 circuit)
85
rd
circuit).
rd
Phase 3 (3 circuit)