Integral Export Power Of Each Phase / Each Circuit - Panasonic KW9M User Manual

6.2.10 Integral export power of each phase / each circuit

・The present integral export power of each phase or each circuit is displayed.
(It doesn't display for 3P3W system.)
・Press <SHIFT/▽> to change active, reactive and apparent.
・Press <SET> to change the display with each time-zone.
After changing, press <SET> to change displayed time-zone.
time-zone1(T1) →time-zone2(T2) →time-zone3(T3) →time-zone4(T4) →All time-zone
*Time-zone without setting for any time program is not displayed.
All time-zone
st
Phase1 / 1
Integral active power (export)
Phase (CH)
time-zone1
time-zone2, time-zone3, time-zone4 and all time-zone are changed in turn.
・Integral power is measured and displayed from 0.000 to 9999999.9 (kWh/kvarh).
・The decimal points is changed automatically.
0.000 99999.999
(After reach the full scale, 9999999.9, the value reverts to 0.000 but continues to measure.)
How to reset integral power (active/reactive/apparent) and integral export power (active/reactive)
・You can reset the value at the optional functions settings.
Refer to 4.4.3 setting for optional functions in detail.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
-circuit
Integral reactive power (export)
100000.00 999999.99 9999999.9
81