Panasonic KW9M User Manual page 52

Power demand alarm hysteresis (OUT1 OUT2)
Set hysteresis to clear timing of power demand alarm.
Power demand alarm start time (OUT1 OUT2)
Set time by minute to start monitoring power demand.
Current demand alarm threshold (OUT1 OUT2)
Set ratio of current demand to use for alarm output.
Current demand alarm OFF threshold (OUT1 OUT2)
Set ratio of current demand to clear the alarm output.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
* It is only when [30min] is selected for power demand type,
and when [AL-PD] is selected for unit for pulse output.
Press <ITEM/△>, <SHIFT/▽> to set.
[Set range] 0 to 100% [%] (initial: 0)
Increase
Decrease
* It is only when [30min] is selected for power demand type,
and when [AL-PD] is selected for unit for pulse output.
Press <ITEM/△>, <SHIFT/▽> to set.
[Set range] 1 to 30 [min.] (initial: 10)
Increase
decrease
* It is only when [AL-CD] is selected for unit for pulse output.
Press <ITEM/△>, <SHIFT/▽> to set.
[Set range] 0.0 to 120.0 [%] (initial:0.0)
Increase
decrease
* It is only when [AL-CD] is selected for unit for pulse output.
Press <ITEM/△>, <SHIFT/▽> to set.
[Set range] 0.0 to 120.0 [%] (initial:0.0)
Increase
decrease
45