Panasonic KW9M User Manual page 51

Power type for power demand alarm
Select power type to use for power demand alarm.
Press <ITEM/△>, <SHIFT/▽> to set.
[Set list] P (active power), Q (reactive power), S (apparent power),
-P (active power (export)), -Q (reactive power (export))
Power demand alarm threshold (OUT1 OUT2)
Set a value of instantaneous power to use for alarm output.
It differs the unit according to the selected power type.
Press <ITEM/△>, <SHIFT/▽> to set the threshold.
P(active power)
-P(active power (import))
Power demand alarm OFF threshold (OUT1 OUT2)
Set a value of instantaneous power to clear the alarm output.
It differs the unit according to the selected power type.
Press <ITEM/△>, <SHIFT/▽> to select the threshold.
Set range] 0.000 to 99999.999 [kWh/kvar/kVA] (initial: 99999.999)
P(active power)
-P(active power (import))
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
* It is only when [Slide] or [Fixed] is selected for power demand type,
and when [AL-PD] is selected for unit for pulse output.
* It is only when [Peak] isn't selected for power demand type,
and when [AL-PD] is selected for unit for pulse output.
[Set range] 0.000 to 99999.999 [kWh/kvar/kVA] (initial: 0.0)
Q(reactive power)
-Q(reactive power (import))
* It is only when [Slide] or [Fixed] is selected for power demand type,
and when [AL-PD] is selected for unit for pulse output.
Q(reactive power)
-Q(reactive power (import))
S(apparent power)
S(apparent power)
44
(initial: P (active power))
Increase
decrease
Increase
decrease