How To Update The Firmware; Connect Pc And Eco-Power Meter; Prepare Eco-Power Meter To Update; Update The Firmware Using Kw Version Upgrade Tool - Panasonic KW9M User Manual

7.2 How to update the firmware

7.2.1 Connect PC and Eco-POWER METER

Connect a PC via USB with Eco-POWERE METER.

7.2.2 Prepare Eco-POWER METER to update

Shift the device to update mode according to the below procedures.
1) Press 2 keys of <MODE> and <ITEM/▲> for 10 seconds.
2) Password entry window will be displayed. Enter the password.
[PROG] on the upper line and the current version [x.xx] on the middle
line are displayed.
This is ready to update the firmware of Eco-POWER METER.

7.2.3 Update the firmware using KW Version Upgrade Tool

Connect Eco-POWER METER to PC via USB cable.
1) Start "KW Version Upgrade Tool".
2) Select "KW9M" at Type, it changes the window for KW9M.
3) Set connected interface with [Environmental setting] and window appears for setting.
Port is displayed automatically. If it is different, set it.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
[RS485]
Set as below.
Baud Rate: 19200bps
Data length: 8bit
Stop bit: 1
Parity: Odd
103