Panasonic KW9M User Manual page 47

Over frequency alarm threshold (OUT1 OUT2)
Set a value of frequency to use for alarm output.
Over frequency alarm OFF threshold (OUT1 OUT2)
Set a value of frequency to clear the alarm output.
Under frequency alarm threshold (OUT1 OUT2)
Set a value of frequency to use for alarm output.
Under frequency alarm OFF threshold (OUT1 OUT2)
Set a value of frequency to clear the alarm output.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
* It is only when [AL-oF] is selected for unit for pulse output.
Press <ITEM/△>, <SHIFT/▽> to set.
[Set range] 0.00 to 100.00 [Hz] (initial:100.00)
Increase
decrease
* It is only when [AL-oF] is selected for unit for pulse output.
Press <ITEM/△>, <SHIFT/▽> to set.
[Set range] 0.00 to 100.00 [Hz] (initial:100.00)
Increase
decrease
* It is only when [AL-UF] is selected for unit for pulse output.
Press <ITEM/△>, <SHIFT/▽> to set.
[Set range] 0.00 to 100.00 [Hz] (initial0.00)
Increase
decrease
* It is only when [AL-UF] is selected for unit for pulse output.
Press <ITEM/△>, <SHIFT/▽> to set.
[Set range] 0.00 to 100.00 [Hz] (initial0.00)
Increase
decrease
40