6.2.18 Pulse Input Value
・The present pulse input value is displayed.
・Pulse input status (ON or OFF) is confirmed via communication. (MEWTOCOL and MODBUS)
Pulse input
- 1
M
T
C N
1 2 3 4 5 6 7 8 9 0 1
*Turn on the unit during IN1 is shorted, first 1-pulse is not counted. After that, when pulse is input
pulse it count the pulse.
6.2.19 Conversion value for integral active power
・The conversion value for the present integral active power (P) is displayed.
(Only total conversion value is displayed for 3P3W system.)
・Press <SHIFT/∧> to change total, phase 1 (1
<1P2W/1P3W/3P4W>
Total
1
- 1
M
2
C H
G
3
Σ
1 2 3 4 5 6 7 8 9 0 1
<3P3W>
Total
1
- 1
M
2
C H
G
3
Σ
1 2 3 4 5 6 7 8 9 0 1
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
st
circuit), phase 2 (2
*The conversion value exceeds "99999999",
"--------" is displayed.
Check and confirm the measurement environment.
nd
circuit) and phase 3 (3
rd
circuit).