Panasonic KW9M User Manual page 50

Voltage unbalancing alarm threshold (OUT1 OUT2)
Set an unbalancing to use for alarm output.
Voltage unbalancing alarm OFF threshold (OUT1 OUT2)
Set a value of unbalancing to clear the alarm output.
Current unbalancing alarm threshold (OUT1 OUT2)
Set a value of unbalancing to use for alarm output.
Current unbalancing alarm OFF threshold (OUT1 OUT2)
Set a value of unbalancing to clear the alarm output.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
* It is only when [AL-VU] is selected for unit for pulse output.
Press <ITEM/△>, <SHIFT/▽> to set.
[Set range] 0.00 to 999.99 [%] (initial: 999.99)
Increase
decrease
* It is only when [AL-VU] is selected for unit for pulse output.
Press <ITEM/△>, <SHIFT/▽> to set.
[Set range] 0.00 to 999.99 [%] (initial: 999.99)
Increase
decrease
* It is only when [AL-CU] is selected for unit for pulse output.
Press <ITEM/△>, <SHIFT/▽> to set.
[Set range] 0.00 to 999.99 [%] (initial: 999.99)
Increase
decrease
* It is only when [AL-CU] is selected for unit for pulse output.
Press <ITEM/△>, <SHIFT/▽> to set.
[Set range] 0.00 to 999.99 [%] (initial: 999.99)
Increase
decrease
43